Vertical Type 3 Roll Plate Rolling Machine
|FOB Price:||US $34,500 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $34,500/ Piece|
|Production Capacity:||30 Sets Per Month|
|Payment Terms:||L/C, T/T, Western Union, Paypal, Money Gram|
- Model NO.: W11TNC-10× 2000
- Condition: New
- Automation: Semi-Automatic
- Quantity of Roller: Three Rollers
- Driving Mode: Mechanical
- Rolling Length: 3200-4000mm
- Trademark: METASSE
- Specification: ISO9001
- HS Code: 8462299000
- Warranty: 1-year
- Certification: ISO 9001:2008
- Suitable for: Copper, Aluminum, Alloy, Carbon Steel, Stainless Steel
- Type of Rolling: Symmetrical Type
- Prebend: No
- Structure: Vertical Type
- Transport Package: by Container with Soft Film Layer
- Origin: China
Roll metal plate
1. Main parts
The machine consists of front roll, back roll, pedestal (machine frame), drop-end, balance system, driving system, electrical system and hydraulic system. Pls. see the attached diagram and remarks.
The figures of the above diagram are the following parts:
1. Reversal bearing body
2. Top machine frame
4. Back roll
5. Front roll
6. Oil pipeline
8. Bottom machine frame
10.Supporting roll for plate
2. Mechanical system
The machine is the vertical type 3 rolls symmetrical hydraulic plate bending machine.
The two back rolls are active rolls, and have the fixed positions. The front roll can move forward and backward. The front roll relative to two back rolls can be adjusted as parallel or oblique position to adapt to the requirements of rolling various shapes work pieces. The front roll and back roll are installed separately on the pedestal (machine frame), bearing body and top machine frame.
Top machine frame is installed on the pedestal and upright.
The main body of machine frame is composed of the pedestal, upright and machine frame.
The lifting oil cylinder is installed inside of upright, which connects to left & right bearing body of front roll by piston rod to push the front roll forward and backward.
The driving system is independently installed in pedestal to connect to two back rolls by gear group.
The drop end and balance mechanism are set at the top and bottom ends of front roll so as to take the cylindrical work piece out from the front roll.
3. Electrical system
Centralized electrical control is employed for the machine's action. It is operated on the electrical control station for the forward and backward move of front roll to press plate, the positive and negative rotation and brake(stop machine) of back roll to bend plate as well as the stand and reset of drop-end.
The touch screen on the electrical control station can display the moving position of front roll.
The electrical system of machine uses PLC with easy operation and high efficiency.
Because of fixed two back rolls positions which are always symmetrical to the front roll, the auxiliary time to roll work piece is very short so as to improve the working efficiency.
4. Hydraulic system
It is driven hydraulically for the moving of front roll and the drop down and reset of drop-end.
Hydraulic system consists of high pressure gear pump, solenoid relief valve and safety valve.
The pressure of hydraulic system is controlled by solenoid relief valve. Safety valve protects gear pump and hydraulic system to avoid the over pressure.
5. Main technical parameters
|1||Max. Rolling plate thickness||10mm|
|2||Max. Rolling plate width||2000mm|
|3||Plate yield strength||245MPa|
|4||Min. rolling diameter at max. plate width(2000mm) and max. plate thickness(10mm)||φ600mm|
|5||Top roll diameter||φ220mm|
|6||Bottom roll diameter||φ200mm|
|7||Center distance between two bottom rolls||280mm|
|9||Working pressure of hydraulic system||18MPa|
|10||main motor power||11KW|